| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | 100 shot what will blow first? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=40391 |
|
40391, 100 shot what will blow first? Posted by slacker911, Jan-22-03 07:16 PM lets say in theory that I put a 100 shot on my car what will go first piston/rings or vavles? I would do the 100 with just a better fuel pump and maybe some injectors plus a little race gas. Also those that have done a 75 or 100 will I have to worry about traction on the street in 2nd gear? | |
|
40392, RE: 100 shot what will blow first? Posted by NO2AVENGER, Jan-23-03 04:30 AM both. First I had a ring land break. Fixed that and then I had two valves melt. The stock parts just can't handle the extra heat. That was at 100 shot. I ran for two years at a 75 with no problems | |
|
40393, RE: 100 shot what will blow first? Posted by Fast420A, Jan-25-03 01:30 PM HG if it's weak. At the first sigh of detonation it's bye bye ring lands. Valves it's hard to say, some last some don't. Either way, I would only run over 75 on a built engine and then you'll be able to run 100+ shots. | |
|
40394, RE: 100 shot what will blow first? Posted by Nitrous_RS1997, Jan-27-03 11:46 AM i ran a 125-shot on a built engine for about a year a while ago. traction in 2nd gear with street tires will be NON-existent. get a progressive controller or only race from a roll... haha. | |
|
40395, RE: 100 shot what will blow first? Posted by SilverEclipse, Feb-14-03 06:36 PM The first thing that will happen is your passenger side floor board will fall out...j/p:7 But seriously, thats a lot to ask of the stock internals. Might go for a HG and rings and beef up bottom end. Im with those guys ^^^ | |
|
40396, RE: 100 shot what will blow first? Posted by Apocalypse, Feb-19-03 03:42 AM >The first thing that will happen is your passenger side floor | |
