| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | 2.25 in. intercooler piping question...(not same question as before) |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=39282 |
39282, 2.25 in. intercooler piping question...(not same question as before)
Posted by tim97rs, Feb-16-03 02:36 PM
it wont hurt anything to run 2.25 inch piping from turbo-> intercooler-> intake will it? by this i mean the side mount piping is 1.75 inch, so coming from 2.25 reducing down to 1.75 then going back out to 2.25 wont cause any pressure issues will it?
thanks
|
39292, RE: 2.25 in. intercooler piping question...(not same question as before)
Posted by tim96rs, Feb-16-03 05:15 PM
Your running a T-25 right? The turbo inlet and outlet are 2in OD. Don't know about a 1g intercooler but a 2g one is 2in. I am running 2in. no problems. Need info.:thumbsup
|
39294, RE: 2.25 in. intercooler piping question...(not same question as before)
Posted by MR BLUNT 2gnt, Feb-16-03 05:52 PM
as long as it is a smooth transition it shouldn't matter...you want the air doing least amount of movement on the way to the tb as possible
|
39319, RE: 2.25 in. intercooler piping question...(not same question as before)
Posted by XtremeRS, Feb-17-03 04:11 AM
I run the 1g side mount with the 1.75" inlet/outlets, and 2.25" IC piping and have no probs at all. You actually want a tad bit bigger IC piping than what the IC is to help keep some air velocity through the IC. You may even want to step up the size before the TB like the HRC setup, to 2.5" to make it more even sized going into the TB inlet.
|