| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | After a rebuild - did you go back to NA or stay turbo during breakin?? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=39213 |
39213, After a rebuild - did you go back to NA or stay turbo during breakin??
Posted by RyaN95i4, Feb-15-03 10:53 AM
LIke the topic says, after a rebuild, did you guys leave the turbo on and just try to stay out of boost? go back to NA? or just disconnect the wastegate to prevent boost?
|
39215, RE: After a rebuild - did you go back to NA or stay turbo during breakin??
Posted by DarkOne, Feb-15-03 11:35 AM
I just took out my boost controller. Ran 5 lbs for about 3000 miles.
|
39217, RE: After a rebuild - did you go back to NA or stay turbo during breakin??
Posted by 420aturbo, Feb-15-03 02:14 PM
You can stay turbo. Atfer rebuilding motors on 4G63's, SR20's and 2JZ's, they all run turbos and nohing happens. Just keep the boost down.
|
39240, RE: After a rebuild - did you go back to NA or stay turbo during breakin??
Posted by Strauss, Feb-16-03 05:32 AM
Just like they said, just turn the boost down and take her easy for awhile.....
|
39254, RE: After a rebuild - did you go back to NA or stay turbo during breakin??
Posted by RyaN95i4, Feb-16-03 09:18 AM
cool, thats what ive been doing. just wanted to see if it was alright :thumbsup
|
39306, RE: After a rebuild - did you go back to NA or stay turbo during breakin??
Posted by HadesOmega, Feb-16-03 10:38 PM
just stay off the pedal don't let it boost that easy. Haha that's what I"m guessing.
|
39422, RE: After a rebuild - did you go back to NA or stay turbo during breakin??
Posted by thedawg, Feb-18-03 01:19 PM
I disconnected my wastegate. :shrug: Couldn't rev to proper RPMs for hard breakin on my ATX without going into high boost.
|