well i got a new greddy peak hold gauge, but i have to hook up 3 postives and one of them it says, to hook it up to the ignition wire (+) what color wire is that? and where is it located at? im just wondering why i cant use one postive (+) for all 3?
i was not sure where to post this.. sorry if its in the wrong section
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild

http://www.dreamwater.net/purplebeast

These are the ignition harness wires:

12V - white
STARTER - black w/ red stripe
IGNITION - black w/white stripe
ACCESSORY - blue w/ black stripe

As for the 3 positives:
one is probably to turn on the gauge (ignition wire),
one is probably to turo on the gauge light (park light wire),
etc..

thanks dude
Michael 99gs
HRC Stage 2 @12psi :D
Stage 3 process begins gathering parts for rebuild

http://www.dreamwater.net/purplebeast

mike,
ignition is just switched power, one wire is for battery constant, and the other is for lighting. make sure you hook them all up right. cause you don't want the gauge to stay on all the time or stay lighted up all the time.
lates
james