| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | HRC oiling question... |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=38738 |
|
38738, HRC oiling question... Posted by The1Bill, Feb-07-03 03:45 PM Quick easy question for you guys, on the tee that screws into the back of the block for an HRC kit, the braided Earls line screws into the top. Does it screw into an adaptor before the tee? I can't seem to get the adaptor off of the car that I am working on, and the tee is in turn hitting the rear motor mount bracket when I try to remove it. I think that there is an adaptor, the 19MM hex at the top, but I would like some confirmation. It is REALLY hard to get out of the tee, for some reason. It just doesn't want to turn. | |
|
38739, RE: HRC oiling question... Posted by Fast420A, Feb-07-03 04:08 PM Well here's each part of the HRC oil system, maybe this will help. | |
|
38741, RE: HRC oiling question... Posted by The1Bill, Feb-07-03 04:14 PM So there are 2 3/4" NPT fittings on the Tee that screws into the block. That means that the big ole 19MM hex on the top hasta go. The 19MM hex that I am referring to is the second thing, right under the tee. It is an adaptor that goes from the 3/4" NPT to whatever the braided stainless line's fitting is. | |
|
38764, RE: HRC oiling question... Posted by MotoFool, Feb-08-03 08:46 AM fast420a do u have a pic of the fuel system fittings by a chance? | |
|
38768, RE: HRC oiling question... Posted by Fast420A, Feb-08-03 11:30 AM This is the only one of the fuel system that I have. | |
