| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | forged pistons | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=38665 |
38665, forged pistons
Posted by 420aturbo, Feb-06-03 06:31 AM
Any one besides TommyBoy running forged pistons on the stock rods? I read on the board here that the stock rods were good to about 15-17 psi.
|
38669, RE: forged pistons
Posted by dougie2, Feb-06-03 07:25 AM
I'm sure other have done the same thing. Tommyboy was bending stock rods at 14+ psi. I wouldn't push any more than 11-13 on the stockers. Rods aren't that expensive, you should buy them now and you shouldn't have to buy another set again.
|
38682, RE: forged pistons
Posted by 420aturbo, Feb-06-03 03:01 PM
Just looking at my options
| |