LAST EDITED ON 15-Apr-01 AT 01:45 PM (PST)

Take a look at this post:
http://www.dsmtalk.com/forums/showthread.php?threadid=12113

Would the 89-91 injectors from a 2G RX7 fit into our cars since their plug type is different (saying non DSM meaning it won't fit the 4G63, so would it fit us???)



___________________________
l e o n
1995 Eagle Talon ESi-T
Boost Cautiously...

The plug type and injector type (high or low impedence) would have to be the same for a direct swap. According to those post different yr RX-7s had different injector types but all but one yr had the same plug type as the 4G63 (which I assume is the same as ours since someone stated they unknowingly installed 550cc injectors designed for the 4G63 in their 2GNT). Then again I could be way off but I'm assuming plug type was being referred to as a physical attribute to the injectors.

Stan2gnt
Stan2va@aol.com
95 Talon ES-I-NOS but T soon!

I know that when one says plug types there are 'Import' plug types and 'Domestic' plug types, and since our engine being domestic and all, I'm hoping that that specific years of the RX-7 uses the same plugs as us???



___________________________
l e o n
1995 Eagle Talon ESi-T
Boost Cautiously...