I am finally installing my HRC kit. I bought it used this summer and finally have the time to install it. I am sure i am going to need some questions answered. The one thing i need first is the HRC instructions. I have almost all the pages, and i have no clue where the rest went. I am doing all of the mechanical stuff tonight and tomorrow, and i will attempt the gauges and the tuning for sunday. So post here if you dont mind getting bombarded with questions on here or aol. Thanks everyone!

Does anyone have pictures of the oil pan bulkhead fitting? And some pictures of the oil sending unit setup? I should of looked this kit over better before i started my install...

I need some help guys so i am stopping for the night. I took some pics of the things i need help with. (might have to copy/paste these)

#1 Will this bulkhead work on the oil pan? I snagged it from a Nova fuel cell.



#2 Here is a pic of my manifold & EGT probe. Problem is, big threaded hole in manifold, and the probe looks like it is missing a piece. Whats missing?




#3 And finally WTF is this?




All help is appreciated.

Alright bro Here are a few pics to help ya out. Now I have a custom setup but you should get teh idea from these pics.

Fitting for the back of the block... all assembled you can see it is one "T" one nipple, the oil sending unit and the end that feeds the oil line.



Here it is at the back of the block.



Here ya go about the oil dump stuff...I think you will get the idea about them.







Here is another look at what the oil feed should look like...




Just keep in mind my setup is custom. But the pricipals are the same.

I really could not tell you about the black box. But your proboly right about not having all the stuff for your EGT gauge.
Hope these pics help.

O yea look for optimus peterson he has the hrc and starr instructions avaliable for download.

RxR Out.

Thanks for the pics you got a +. I found the instructions on optimuspeterson's site earlier after seaching for awhile (i knew someone had them). I just need a pic now of what i am missing for the EGT probe. I am sure i will have more questions tomorrow. Thanks again!

I'm not sure these pics help, but every little thing will help.

turbo install
http://www.fast420a.com/images/turbo/

Custom 1G SMIC install
http://www.fast420a.com/images/Kris/intercooler/

Oh yeah, STOCK UP ON A LOT OF MOUNTAIN DEW, BEER, BEER, AND BEER!!!!!

GOOD LUCK!!!!!!!!!!!!!!!!!!

Custom made the bulkhead for the oil pan & the EGT probe. I just finished wiring the the inline fuel pump and the relay. Next is installing the manifold/turbo and the piping! I am going to need some hlp later on the gauges... Looks like the guy who i bought it from just cut all the wires.

Good luck. Check the pics that Kris (RobotechDSM) posted from my site. They should help with most questions you may have.

________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

WAY TO GO JON! :thumbsup Gimme a call tomorrow sometime if you could use some extra hands! Sarah's working all day and I'd love to help out if I can!

L8

Almost there! Fuel system is next. I bought the Vortech SFMU and the missing link just trying to figure out how it all hooks up now. Then i will attemp installing all of the gauges. Boost, A/F, EGT, Fuel pressure, and oil pressure. All the gauges and wiring was just thrown together in a bag, i have most of it sorted but i still need to know what this thing is...

I think that black box is wat they call the fuel mapper its a fuel cut defenser I dont think u need it if u got the missing link.