| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | ECU Code problem | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=36252 |
36252, ECU Code problem
Posted by mitifto, Dec-19-02 04:15 PM
I use my snap on computer on my eclipse and the code p10108 comes up. The codes means that to much voltage is flowing from the o2 sensor. I clear the code and it comes back later. Is their a fix for this. Thanx
|
36253, RE: ECU Code problem
Posted by mcgyvr, Dec-19-02 11:46 PM
well you might have a short between the signal wire and the voltage input wire, or your running sooooooooooo rich that its causing problems with the ECU
Your gonna have to hook a voltmeter up to the signal wire at the ECU (white wire with black stripe) and check voltage at idle and Wide open throttle
it should be from 0-1.2vdc max, if its 5 vdc or so you have a short between the input voltage wire (the one for the heater part of the o2 sensor and the signal wire)
|
36254, RE: ECU Code problem
Posted by DarkOne, Dec-20-02 01:32 AM
Your O2 sensor is shot. Replace it.
| |