Go back to previous topic | Forum name | Turbo/Nitrous Tech | Topic subject | -4AN possible replacement?? | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=34884 |
34884, -4AN possible replacement?? Posted by Collente, Dec-31-69 06:00 PM
Hey guys, I know that the fitting on the fuel rail of a 97+ eclipse is a -4AN fitting. Well I am having a hard time finding one where I live. I have checked 3 different places, and all a no. Is there any other measurment that you know that will fit? Possibly a metric of some sort (ie. 3/8, 5/16, 1/40)? The turbo goes in on sat, so all help asap is appreciated. TIA! Nick 97RS
|
34885, RE: -4AN possible replacement?? Posted by Matt_95tgs, Dec-31-69 06:00 PM
I get all of those fittings from summit. You can call them up and tell them the exact fitting you need and they will have it.
|
34886, RE: -4AN possible replacement?? Posted by Collente, Dec-31-69 06:00 PM
Bumpidy Bump.. Does anyone have any other Ideas? Or any other fitting options, it seams a little strang to only have this 1 fitting is AN. Thanks guys, Nick 97RS
|
34887, RE: -4AN possible replacement?? Posted by mkerley, Dec-31-69 06:00 PM
-4an is 1/4npt, but it won't seal as well. When it comes to sealing a fuel line, I'd wait and make sure you get the right thing, but it's up to you. Summitracing.com or anplumbing.com will both have exactly what you need.
I get my parts from a fluid power (industrial hydraulics) place which sells parker products. Look in the phone book for some such place in your area or get it shipped overnight from summit.
matt
|
34888, RE: -4AN possible replacement?? Posted by Collente, Dec-31-69 06:00 PM
Thanks for all of your help guys. It looks like I will go with the 1/4 fitting with some sealent for now, untill the -4AN fitting comes. I appreciate all of your help, the turbo is going in tomarow and tonight (and most likley sun :) ) I feel like a little school girl ;) Thanks! Nick 97RS
|
34889, RE: -4AN possible replacement?? Posted by jamesman, Dec-31-69 06:00 PM
where are you located? lates james
|
34890, RE: -4AN possible replacement?? Posted by Collente, Dec-31-69 06:00 PM
Springville, UT Nick 97RS
|
34891, RE: -4AN possible replacement?? Posted by jamesman, Dec-31-69 06:00 PM
doh! i have the fitting that comes with the hrc kit i am in california, i would let you have it but you are not local! DOH!
lates james
|
34892, RE: -4AN possible replacement?? Posted by Collente, Dec-31-69 06:00 PM
Hey guys, Well after a custom turbo install nightmare. The 1/4 fitting is to small ,is their any other suggestions, maybe a 5/16??? thanks guys, Nick 97RS
|
34893, RE: -4AN possible replacement?? Posted by mkerley, Dec-31-69 06:00 PM
the -4 designation is per 16th. an -8AN would be 1/2 (or 8/16) a -4AN will be 1/4 (4/16). check the thread depth or just go get the right fitting. Personally, I wouldn't use the npt, I'd make sure I got the correct AN fitting especially for fuel in the engine bay. Summit can have it to you by Tues if you order it tomorrow.
*EDIT* or try some of your local hydraulic stores. I searched for hydraulic in yahoo in springville, ut. There's tons of places near you. Call them up.
| |