| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | What should be my next step? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=34866 |
34866, What should be my next step? Posted by Semperboost, Nov-21-02 06:11 AM
I have the usual mods (look down below) for the turbo and I'm looking for more power at the same boost level (6-8 psi). I don't have internals so I can't just up the boost to make power. I got some choices 1) 310cc injectors and a 8:1 2) MSD or Crane ignition 3) S-AFC Are there any other suggestions on what to do ? thanks
Alvin
96 RST
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / 55mm ARD TB/ Nology wires / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Lower strut bars / Rear GST sway bar/ GSX Dual Piston Calipers, X-drilled/ slotted rotors
|
34867, RE: What should be my next step? Posted by mcgyvr, Nov-21-02 08:36 AM
INTERNALS
or just go to a dyno and get your car tuned correctly, thats the best way, then if you need more fuel at that boost level then up the injectors or whatever, but if you want more power at the same boost level just get your car tuned correctly
|
34868, RE: What should be my next step? Posted by pn0ymahal, Nov-21-02 09:03 AM
get all 3 and you can turn up the boost a bit.. and if u got the money get it dyno/tuned.. =)
Michael 99gs HRC Stage 2 Stage 3 process begins gathering parts for rebuild
 http://www.dreamwater.net/purplebeast 
|
34869, RE: Tunning Posted by Semperboost, Nov-21-02 02:58 PM
I know internals would be the next step to turn up the boost, but I funds are the problem - I probably will if and when I blow the motor. Injectors and a new disk will run about $150 and the SAFC or the MSD would be around $300. The thing about tunning is I have nothing to tune it with. What do they hook up to the car when it's on the dyno?...just a wideband o2 sensor in the tailpipe..is that it?
Alvin
96 RST
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / 55mm ARD TB/ Nology wires / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Lower strut bars / Rear GST sway bar/ GSX Dual Piston Calipers, X-drilled/ slotted rotors
|
34870, RE: Tunning Posted by HiOnPSI, Nov-22-02 12:09 AM
Get the 30lb'ers, better safe than sorry. Especially if you want to push the limits of your stock shit. 30 lb injectors will do that. Many people say you won't need an AFC with these cars, but i have one anyway.
I would do that, and then get Phantom Grip :) cause you'll need it.

Jon
1997 Eclipse RS
14.21@101mph 10/4/02
MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC
|