Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectwhats evryones dyno numbers?????
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=31752
31752, whats evryones dyno numbers?????
Posted by qwad65, Sep-25-02 04:41 AM
i was just wondering whats everyones dyno numbers and at what psi you got them?
31753, RE: whats evryones dyno numbers?????
Posted by Super20G, Sep-25-02 10:50 AM
dyno's are for sissies.... and rich people... hehe... dino dyno'd 300hp, armond dyno'd 400hp, i will dyno when i get an internship through school and start getting a paycheck
31754, RE: whats evryones dyno numbers?????
Posted by Avenger EST, Sep-25-02 12:14 PM
I'm a sissie :-P 405 hp, 408 lb ft torque.

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............
31755, RE: whats evryones dyno numbers?????
Posted by Chris_FL, Sep-25-02 12:34 PM
>I'm a sissie :-P 405 hp, 408 lb ft torque.
>
>A.D.P.

that's it??!!? pffftttt :P

31756, RE: whats evryones dyno numbers?????
Posted by DarkOne, Sep-25-02 12:40 PM
I'm almost as big a sissie as Armond - 302hp / 293ft-lbs
31757, RE: whats evryones dyno numbers?????
Posted by Super20G, Sep-25-02 01:49 PM
It was a joke guys, teehee. I am jealous cause you all got more money to throw around :P Funny thing is, there is a dyno right down the road from my campus, I pass it all the time, and i am too cheap to throw down 50 bucks for 3 runs... That could be a tank of race gas! :-)

for future note though armond, what did you say a turbo guy should tune the A/F around?

P.S. I wish bill would throw down some dyno's for their RS with the monster 25g on it.
31758, RE: whats evryones dyno numbers?????
Posted by Avenger EST, Oct-02-02 01:47 PM
around 11.3:1



A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............
31759, RE: whats evryones dyno numbers?????
Posted by RyaN95i4, Sep-25-02 02:56 PM
im only half the sissy Armond is, lol

203whp, 202 ft-lbs.... 9psi, automatic & untuned (like 9:1 A/F for 3/4 of the pull, lol )
31760, RE: whats evryones dyno numbers?????
Posted by aj, Oct-03-02 05:37 AM
jeez's Dino.I remember when we were on the same page almost.How much you boosting now?Dang,I'm really being left behind....
31761, RE: whats evryones dyno numbers?????
Posted by Dualgen2, Oct-03-02 10:48 AM
Almost 200 HP to the wheels while blowing up at 10psi. hahah. just 2 mufflers and a filter as supporting mods though.
-Dave
31762, RE: whats evryones dyno numbers?????
Posted by 96venger, Oct-03-02 06:34 PM
265hp and 295 ft-lbs @ 13 psi
That was way rich too, I will have new numbers tuned and at 18 psi Sat. I hope
31763, RE: whats evryones dyno numbers?????
Posted by caliboy23, Oct-03-02 06:38 PM
Back in the day I dynoed 122 HP and 122 torque on Wyatt's dyno at Race Prep. That was with a cold air intake only.

Didn't some magazine dyno 119 with cold air intake, header, and exhaust? Makes me wonder how I topped them with only 1 mod. They probably didn't use a fan in the front.

Mark
31764, RE: whats evryones dyno numbers?????
Posted by whodatt1, Oct-04-02 01:25 AM
192.5whp and 181.7 torque.
at 7.5-8psi un-tuned. with a slight fuel cut at about 4.3k rpm