well today i finished re-installing my turbo kit but for some damm reason i cant go past 60 psi fuel pressure at full boost! i have the lil brass valve closed ALL the way and all vaccume lines are attached in the right position. i triple checked. wat can it be? it was wurkin fine b4 i took off the kit. plz help. i am soo slow. thnx.



(im the black one)

-mitsuman
95 gs 5-spd
Hrc stg 2

BTTFT



(im the black one)

-mitsuman
95 gs 5-spd
Hrc stg 2

u got the hrc fpr? well just turbo the brass knob the other way see if that is the correct way to give more fuel. just make sure the hrc bleed is on also..
cool


Michael 99gs
HRC Stage 2
Stage 3 process begins anyone got a 420a block thats not spun/head for sale?

http://www.dreamwater.net/purplebeast

nop still doesnt wurk. well im installing my s-afc and injectors today so will it really matter since my fuel pressure at full boost with 440's will be 40 psi?



(im the black one)

-mitsuman
95 gs 5-spd
Hrc stg 2

you got your fuel pump hooked up properly? I would make sure that you do because the stock pump wont flow enough for those 440's...

i got the walbro intank fuel pump.



(im the black one)

-mitsuman
95 gs 5-spd
Hrc stg 2