| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | WG boost lines | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=30484 |
30484, WG boost lines
Posted by Semperboost, Sep-04-02 06:45 AM
On top of of the Deltagate there is a VAC line which is closed off. On the side there is another port where you hook up to the intake manifold. Question is where do you hook up the Boost Controller to. I thought you just put it inline with the port on the side that attaches to intake manifold. But I saw a post saying you use the top port, so which goes to which? thanks
aLvin
96 RST
http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs
|
30485, RE: WG boost lines
Posted by brynden29, Sep-04-02 06:53 AM
Well, I do not have the delta gate, I have the Tial, but it is the same thing. 2 Ports. The top is not used, for a manual BC. I ran a vac line straight from the mani, teed it off and ran one line to my boost gauge and the other to my BC in. Ran the out from the BC to the wastegate. Mine seems to be working fine and I am getting a pretty accurate boost reading. (from what I can tell) I hope that helps.
| |