Go back to previous topic |
Forum name | Turbo/Nitrous Tech |
Topic subject | Want to upgrade from a HRC Stage II.....Now what? |
Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=29785 |
29785, Want to upgrade from a HRC Stage II.....Now what? Posted by esseclipse, Dec-31-69 06:00 PM
I have a 99 Eclipse GS OZ with a HRC Stage II,HRC FMIC, Greddy Evo Cat-Back, Random Tech High-flo Cat, I have a Greddy Profec B and a underdrive pulley on the way. Now what should I do, I want to ugrade my pistons, rings, rods, injectors...etc. What should I get?...Help I need more than 5psi...I am thinking more like 13psi. I appricate the help. Check out a website me and some of my boys through together eastss.com my car is under mafuch
|
29786, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by spike14485, Dec-31-69 06:00 PM
http://howell.mountain.net/sdc/howell/ they have a kit on there that has everything u need to rebuild the bottom end
|
29787, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by Twiste, Dec-31-69 06:00 PM
i think if ur gonna run more than 9 psi ur gonna want bigger injectors and maybe a SAFC
|
29788, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by DSMeclipseGS, Dec-31-69 06:00 PM
uhh.... if you're stage two you can boost to 10 psi i thought.
|
29789, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by HiOnPSI, Dec-31-69 06:00 PM
i wouldn't do it on stock injectors.
Jon
1997 Eclipse RS
14.49@99mph 7/27/02
MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 2 JL 12" W0 subwoofers / JL Audio 500/1 amp / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC
|
29790, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by esseclipse, Dec-31-69 06:00 PM
I am going to get a S-AFC. What injectors should I get? I am also going to get the Howell botom end kit. What do I need to do to my motor prior to installing the kit?
|
29791, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by Strauss, Dec-31-69 06:00 PM
All you need to do is bring your block to a machine shop and have them install everything that comes with the bottom end kit from Howell. Then, get yourself the S-AFC and a set of 440 injectors. If you want to be on a budget, you can try to pick up (4) 42lb. Mustang injectors...they work out to be the same thing. With those injectors and a built bottom end, you'll be able to run upwards of 16psi daily.
|
29792, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by esseclipse, Dec-31-69 06:00 PM
I want to get the hahn/accel injectors should i get the 415cc or 500cc what would be similar to the 440cc.
|
29793, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by cyan, Dec-31-69 06:00 PM
the AFC alone wont allow for enough fuel correction to run 500's without running rich.
|
29794, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by esseclipse, Dec-31-69 06:00 PM
So will I be good to go with the 415cc Hahn/Accel injectors and the s-afc?
|
29795, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by Kirby, Dec-31-69 06:00 PM
it will control that size. But there is no need to buy those spesific injectors. I don't know how much those cost but call summit racing and get some accells from there or at least compare prices.
|
29796, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by Matt_95tgs, Dec-31-69 06:00 PM
Well, in light of some fairly recent info from Armond and Chris, I would be willing to bet that with a 1:1 regulator and an AFC she wouldnt run too rich...
|
29797, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by esseclipse, Dec-31-69 06:00 PM
What should I use for a 1:1 regulator? And Where can I get it? I just have what came with the Hahn Stage II right now. What are the best injectors to get then?....I dont really care about price.
|
29798, RE: Want to upgrade from a HRC Stage II.....Now what? Posted by Matt_95tgs, Dec-31-69 06:00 PM
Well, I have an Aeromotive 1:1 regulator that I ordered from summit (part # AEI-13109). I am using it with Corbin's 8 injector setup and the pressures are rock solid with it.
|