| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | What Injectors should I use? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=29260 |
|
29260, What Injectors should I use? Posted by esseclipse, Aug-17-02 12:44 PM I have a HRC Stage II with a fmic. Should I upgrade my injectors? I have stock injectors now. I plan on installing a Profec B boost controller to up my boost from 5psi. What Injectors should I get and what size. Are the HRC/Accel injectors good? | |
|
29261, RE: What Injectors should I use? Posted by BLACKWIDOWDSM, Aug-17-02 04:12 PM dont get any name brand...emial mea ant i can get you all types--- Anthonyl469@aol.com 30lbers will do you good for now | |
|
29262, RE: What Injectors should I use? Posted by Dave_FL, Aug-17-02 04:12 PM If you get anything over 315cc you are going to need an s-afc. And yes the accel ones are great. I have ford 42lb ones in my car. | |
|
29263, RE: What Injectors should I use? Posted by taloniized, Aug-17-02 04:49 PM Will 310cc work well with the mods i have? And will it work with the vortech fmu 12:1? | |
|
29264, RE: What Injectors should I use? Posted by Matt_95tgs, Aug-17-02 04:58 PM Talonizzed: They will work, but the 12:1 disk is going to be too much fuel. If you decide to use these injectors you will need lower rise rate disk in your fmu like a 4.5:1 or somewhere close to that. | |
|
29265, RE: What Injectors should I use? Posted by taloniized, Aug-17-02 05:08 PM Matt_95tgs---What size injectors will work then with 10psi(t3/t4) with the vortech fmu? | |
|
29266, RE: What Injectors should I use? Posted by 420aVenger, Aug-18-02 02:44 AM They will work but you need to change the rise rate. The 12:1 is for stock injectors. Anything bigger and you'll get too much fuel. | |
|
29267, RE: What Injectors should I use? Posted by DeanoD, Aug-18-02 04:15 AM Star turbo kit guys use a 8:1 fmu disc/ring with 30LB Accel injectors. HRC kits use much less fuel if they have a 16G. | |
|
29268, RE: What Injectors should I use? Posted by thedawg, Aug-18-02 04:34 AM 30lb Ford Fuel injectors off eBay. Try and get them new or lo-miles. Nice injectors, damn cheap, don't need any AFC either. | |
|
29269, RE: What Injectors should I use? Posted by Dave_FL, Aug-18-02 07:32 AM We have 440's right Dan? | |
|
29270, RE: What Injectors should I use? Posted by HiOnPSI, Aug-18-02 10:29 AM Ok, i've probably asked a billion times before but with my setup what should I do next. I have the money now. | |
