| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Anyone have this problem after the turbo? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=29 |
29, Anyone have this problem after the turbo? Posted by Sal, Nov-27-00 04:11 AM
My oil is spraying out of the crankcase vent. My breather is soaked in oil and so is my valve cover. Not to mention a small puddle built up on top of my tranny. Any suggestions for a fix?
|
30, RE: Anyone have this problem after the turbo? Posted by Wyatt, Nov-27-00 04:19 AM
hate to say it, but sounds like you have some cracked pistons. It could possibly be a clogged PCV valve but I have yet to see one fail and casue that. Take out your PCV valve and make sur eit works (its just a big check valve) if it doesn't seal, then thats why you are getting positive crankcase pressure and oil is blowing out your breather. Otherwise, look toward a couple cracked pistons. Does the car idle ok? What is your pressure at idle? I believe on a well working engine our idle pressure @ idle should be around (-)17-21 in/hg. Good luck, Wyatt Leras http://www.turbogs.dsmpower.com 98 Eclipse GS Star Stage 5,000 Turbo kit

|
31, crankcase Posted by 95ESi, Nov-28-00 05:37 AM
Where is this crankcase breather / PCV valve thingy? I need to know so I know what is where and such...
BTW, what causes cracked pistons?
l e o n
|
32, RE: Anyone have this problem after the turbo? Posted by manek, Nov-27-00 02:15 PM
i actually have the same problem.....my car idles and runs fine though....it only happened when i did the oil change though so maybe they overfilled???? i'm getting a catch can for mine.......
anthony
|
33, RE: Anyone have this problem after the turbo? Posted by RS_Guy, Nov-28-00 11:19 AM
Usually its no real big deal, and some hard cornering while driving hard will do this.
Also sometime if the engine is overfilled with oil same thing.
Now an extremes is blow-by. That's what I have.
You may have to consider your piston rings. I know that mine are shot. See what happens is if the rings let exhaust fumes through, these get into the oil, and push some out of it through the nearest exit...usually the breather!
In my case the "breather" filter got clogged with so much oil, that my camshaft seal blew out...
Good Luck
Guy RS_Guy

|
34, RE: Anyone have this problem after the turbo? Posted by Shant, Dec-03-00 08:49 AM
I have the same problem but mine is so extreme that I can't drive it, I just replaced my PVC valve just beacause it was cracked ,that didn't help, I believe Rs_Guy is right, I think it's either the piston rings or head gasket, Though at idle I believe my idle is 16-hz... Or whatever, I have to double check, But At initial start up, if I take out the dipstick half way, smoke comes out ,I think white smoke or light colored smoke, same out of my crankcase breather. Which sucks now since I found the last leak in BOV line whick I can finally run over 5psi then this happens, Not sure what I'm going to do.......
Shant 98 Avenger HRC Stage 2
|
35, RE: Anyone have this problem after the turbo? Posted by XT DSM, Dec-04-00 09:31 AM
I had the same problem. all what I can say is, do a compression test, start from the cylinder closest to the battery (#4), why, cause I am pretty sure that very cylinder (piston or ring) is shot already. you are looking at 160+ psi, if you have lower than that (I had 20psi) then it's time for a rebuild.
good luck and hope for the best. I hope I am wrong tho.
Adel http://stop.at/xtdsm

|
36, RE: Anyone have this problem after the turbo? Posted by Shant, Dec-05-00 08:48 AM
Survey says I think your right.We will see this Fri...Oh well I just look at it as building it sooner then I thought, thanks
Shant 98 HRC equipped Avenger
|
61260, RE: Anyone have this problem after the turbo? Posted by RxR_Eclipse, Nov-24-03 02:50 AM
Sorry man, but i will bet my left nut you broke a ring land. Spend the cash and buy at least forged pistons.
|
61266, RE: Anyone have this problem after the turbo? Posted by 992gnt, Nov-24-03 03:34 AM
I'm guessing that in the 3 years since that post was started, he's probably fixed the car. :shrug
|
61268, RE: Anyone have this problem after the turbo? Posted by tim97rs, Nov-24-03 03:58 AM
wow! Deja Vu!!! didnt i write this exact same post about a month ago??? AND... guess what? i broke my piston!!!!!!!
|
61277, RE: Anyone have this problem after the turbo? Posted by DarkOne, Nov-24-03 05:46 AM
Holy SHIT this thread is ANCIENT!
|
61286, RE: Anyone have this problem after the turbo? Posted by Collente, Nov-24-03 07:14 AM
Great job RxR you n00b! Nick 97RS
 turbo8u> shut your SUCK ZAO684: NIPPLE warning...maybe>?
|
61287, RE: Anyone have this problem after the turbo? Posted by run4cvr, Nov-24-03 07:23 AM
I was wondering why i didnt reconise any of the names.
|
61289, RE: Anyone have this problem after the turbo? Posted by etx, Nov-24-03 07:41 AM
:o ! I was about to say SEARCH noob! :7
|
61305, RE: Anyone have this problem after the turbo? Posted by whodatt1, Nov-24-03 10:30 AM
lol I was like WTF Wyatt is back!??
|
61317, RE: Anyone have this problem after the turbo? Posted by CVedEclipse, Nov-24-03 12:57 PM
Originally posted by whodatt1 lol I was like WTF Wyatt is back!??
HAHA ^^ i was thinking the same thing
|
61306, RE: Anyone have this problem after the turbo? Posted by DarkOne, Nov-24-03 10:52 AM
Originally posted by run4cvr I was wondering why i didnt reconise any of the names.
Yeah, sad thing is.. i recognized ALL of them.
Interestingly enough, Shant fix it, ran the shit out of it, parted it, and sold it. I remmeber everyone - never forget that!
|
61335, RE: Anyone have this problem after the turbo? Posted by run4cvr, Nov-24-03 05:03 PM
Originally posted by DarkOneOriginally posted by run4cvr I was wondering why i didnt reconise any of the names. Yeah, sad thing is.. i recognized ALL of them. Interestingly enough, Shant fix it, ran the shit out of it, parted it, and sold it. I remmeber everyone - never forget that!
Old fart :P
|
61344, RE: Anyone have this problem after the turbo? Posted by JasonESi_T, Nov-25-03 03:11 AM
Originally posted by run4cvrOriginally posted by DarkOne Originally posted by run4cvr I was wondering why i didnt reconise any of the names. Yeah, sad thing is.. i recognized ALL of them. Interestingly enough, Shant fix it, ran the shit out of it, parted it, and sold it. I remmeber everyone - never forget that! Old fart :P
Bah, I remember when Dino was a newbie!! I wonder what that makes me!
;(
|
61347, RE: Anyone have this problem after the turbo? Posted by DarkOne, Nov-25-03 05:00 AM
Originally posted by JasonESi_T Bah, I remember when Dino was a newbie!! I wonder what that makes me! ;(
**shudder**
Never speak of this again.
| |