| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Thinner headgasket ? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=28750 |
28750, Thinner headgasket ?
Posted by alain95i4, Aug-11-02 01:07 PM
Hey Guys
Have you ever heard of a thinner headgasket that could raise the compression a little ?
I have a special project comming up and I could need such a thing to raise from a 0.5 up to 1.0 the compression
Alain
|
28751, RE: Thinner headgasket ?
Posted by RxR_Eclipse, Aug-11-02 04:29 PM
I was going to get a thinner gasket and go nitrous. I could not find one, although I found some various types of head gaskets through a couple of neon sights. One of them actually stated to be twice as thick at a stock gasket(for turbo app). But never did find a thinner one.
Alain you could always have the head milled...
off the subject...
Have you gotten any more orders for the t25 manifold lately? I have gotten a TON of emails about it. I have been directing them towards the 14b setup but a couple of them are quite ademant about having a t25....
|
28752, RE: Thinner headgasket ?
Posted by alain95i4, Aug-11-02 10:39 PM
>Have you gotten any more orders for the t25 manifold lately?
>I have gotten a TON of emails about it. I have been
>directing them towards the 14b setup but a couple of them
>are quite ademant about having a t25....
I will have the head milled but I want to take compression from a potential 7.5:1 up to at least 8.8:1 just milling the head is not enought
And no not a single order for a manifold, actually not more than 2 emails for price inquiry, lots of talkers as usual ... but not many doers
but I'm not crazy about the ideas of selling more of those T-25 manifold either
Alain
|
28753, RE: Thinner headgasket ?
Posted by 420aturbo, Aug-12-02 11:15 AM
ya Alain, I still have to send it back to you to be modified. I'm just waiting on Kevin to send me some pics of the downpipe and confirm thaat he can have another one made.
|
28754, RE: Thinner headgasket ?
Posted by alain95i4, Aug-12-02 11:31 AM
>ya Alain, I still have to send it back to you to be
>modified. I'm just waiting on Kevin to send me some pics of
>the downpipe and confirm thaat he can have another one made.
Or can you just sent it to Kevin to have it modified and test fitted like him
It should cost you much less in shipping and you could be sure it will fit with the downpipe
Just an idea
Alain
|
28755, RE: Thinner headgasket ?
Posted by RxR_Eclipse, Aug-12-02 11:59 AM
It will cost me about 50$ to get it modded to fit the t25, I thought that I sent you a bunch of pics last night....let me know it you got them. If you didn't I will send you more. The mainfold does not need to be move alot...
here is a link to my imagstation acct...
I will be adding pictures here all the time..
http://www.imagestation.com/album/?id=4291504911&code=3350934&mode=invite
|