| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | will this fit and wrok?????? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=28343 |
28343, will this fit and wrok??????
Posted by qwad65, Aug-06-02 12:58 PM
is thisok to put a grddy type s on it will weld right to the intake pipe right look?http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1849253264
|
28344, RE: will this fit and wrok??????
Posted by qwad65, Aug-06-02 01:14 PM
bump_ need to find out asap thank you!!!
|
28345, RE: will this fit and wrok??????
Posted by Matt_95tgs, Aug-06-02 01:23 PM
That should work as long as the flange is the same for the 1g BOV as it is for the greddy type s. If you have the piping from HRC, all you need to do is buy the greddy type s with an install kit for the 2g eclipse. Thats all you need.
|
28346, RE: will this fit and wrok??????
Posted by qwad65, Aug-06-02 01:26 PM
i have a star stage 1 and need the bov and a flange is that good to get? i would weld it to the intake pipe and the bov gose on the flange side right.
|
28347, RE: will this fit and wrok??????
Posted by qwad65, Aug-06-02 02:13 PM
bump
|
28348, RE: will this fit and wrok??????
Posted by brynden29, Aug-07-02 01:38 AM
*sigh*
You will have to cut a hole in the intake pipe about the same size as the round part of the flange you just bought. Weld that to the pipe, connect the BOV (if it fits on the flange), connect a vacuum line to the BOV and you are done.
|
28349, RE: will this fit and wrok??????
Posted by qwad65, Aug-07-02 01:57 AM
thank you
|