| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | EGT changes from VC-1 to Missing Link? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=27976 |
|
27976, EGT changes from VC-1 to Missing Link? Posted by DeanoD, Aug-01-02 06:01 AM What happened to your egt readings? Please post actual numbers please. | |
|
27977, RE: EGT changes from VC-1 to Missing Link? Posted by Dave_FL, Aug-01-02 07:32 AM Well no missing link yet but. I have nothing on my car now and the egt's went from going to 1600+ very easily and quickly to going up to 1600 very slowly and then staying at about 1600. It made a huge difference on my car. Just test your MAP voltage with the car off but the key on. It should read ~4.5 volts. | |
|
27978, RE: EGT changes from VC-1 to Missing Link? Posted by BoostedGS, Aug-01-02 07:35 AM >Just test your MAP voltage with the car off but the key on. It >should read ~4.5 volts. | |
|
27979, RE: EGT changes from VC-1 to Missing Link? Posted by XtremeRS, Aug-01-02 08:49 AM I just put a voltmeter on the red and black wires of the FCD..i got 4.01 volts, then disconnected it, and got 4.54 volts..yep bad fcd..I'll be gettin my missing link on tonight hopefully..i'll let you guys know.. | |
|
27980, RE: EGT changes from VC-1 to Missing Link? Posted by pn0ymahal, Aug-01-02 11:12 AM u can check your map sensor voltage on the sensor check screen on the super afc.. its in the etc section... it will be the highest voltage output... also if u go from a vc-1 to missing link you cant get exact # change, it will vary depending what the vc-1 was set to, the missing link is a pretty check valve... on my missing link im getting around 4.5v-4.54v depending where im going into boost at (hot, cold) etc... | |
