Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectatt:wheatking or someone that could help
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=27838
27838, att:wheatking or someone that could help
Posted by dsmlights, Jul-30-02 05:45 AM
anyone here htat has made turbo kit custom, have you been running one fan or have ran one fan before. If done so what are you runing now and how did you to to get 2 fans in there ???

( wheatking )i saw your pictures i have same set up as you with bigger turbo. What are you using as fans so you can turn air on, becuase i am dying here no air for a few weeks.


thanks
27839, RE: att:wheatking or someone that could help
Posted by BlackVenge, Jul-30-02 09:23 AM
if you go on the asog message board and private message him, youll get a quicker response. from my experience with him, ive gotten quicker responses that way.

27840, RE: att:wheatking or someone that could help
Posted by WheatKing, Jul-31-02 01:47 AM
>anyone here htat has made turbo kit custom, have you been
>running one fan or have ran one fan before. If done so what
>are you runing now and how did you to to get 2 fans in there
>???
>
>( wheatking )i saw your pictures i have same set up as you
>with bigger turbo. What are you using as fans so you can
>turn air on, becuase i am dying here no air for a few weeks.
>
>
>thanks

humm.. The sebring has a 2" larger (approx) engine bay.. so I still fit the stock fans.. but because the MT rad is smaller than the AT rad, i punch the A/C button (although there is no A/C in the car) and the A/C fan runs all the time.

I believe you can get some FAL fans that will fit infront of the rad. (remember to get blow through not draw through fans..)

If it's too hot in the car for you.. open the windows and drive faster ;-)

ttyl

WheatKing
27841, RE: att:wheatking or someone that could help
Posted by dsmlights, Jul-31-02 03:01 AM
I believe you can get some FAL fans that will fit infront of the rad. (remember to get blow through not draw through fans..)

do not understand the blow or draw...

deos this mean to get a pusher not a puller .


hehreh i will open windows but its south FL man , and it rains hehehe lolz.
27842, RE: att:wheatking or someone that could help
Posted by 420aVenger, Jul-31-02 03:37 AM
Yes it means pusher not puller.
27843, RE: att:wheatking or someone that could help
Posted by WheatKing, Jul-31-02 08:27 AM
>I believe you can get some FAL fans that will fit infront of
>the rad. (remember to get blow through not draw through
>fans..)
>
>do not understand the blow or draw...
>
>deos this mean to get a pusher not a puller .
>
>
>hehreh i will open windows but its south FL man , and it
>rains hehehe lolz.

hehe ya.. clarification..

Blow through (creates pressure to well.. blow air through things..) ie pusher
Draw through (creates a vacuum to well.. draw air through things..) ie puller

stock fans are draw through.. meaning they suck air through the rad.. you'll need blow through, or in other words, push air through the rad if your going to mount them infront of the rad..

ttyl

WheatKing