| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | egt |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=27601 |
27601, egt Posted by dsmlights, Jul-28-02 05:38 AM
what is the recomended for the egt to run when racing what is the mex and when crusing ???
|
27602, RE: egt Posted by HiOnPSI, Jul-28-02 05:59 AM
depends on where you have the egt probe located. search.

Jon
1997 Eclipse RS
14.49@99mph 7/27/02
MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 2 JL 12" W0 subwoofers / JL Audio 500/1 amp / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC
|
27603, RE: egt Posted by pn0ymahal, Jul-28-02 08:05 AM
egt while cruising could range around 1200-1500 depends.. for racing for safe running etc 1550 should be right on target! anything lower your running to rich (which is ok) anything around 1600 running to lean or you are getting to hot in there etc.. you get max power etc around 1500-1550.. also if your probe is in the dp add around 200-225 give or take.. best to put it in the manifold..hope this helps...

Michael 99gs HRC Stage 2 http://www.dreamwater.net/purplebeast
|
27604, RE: egt Posted by dsmlights, Jul-28-02 08:24 AM
thanks man yah i installed it in piston 4 the closest to the driver side. I am funing 1400 crisnig and stuff i don't know if that is ok.
|