I need a list of color matches for the AFC/ECU wires to tap into. I checked out turboGS's site and I couldn't find a couple of the wires. For any of you with a 95...help me out here. The ones I'm having trouble finding is the power and tach wires at the ECU. Going off the install for 98, I found the other wires.....thanks guys

The tach wire is the only solid white wire in the whole harness. it may have some small square dots on it, but it has no stripes.

The power wire is the only oversized black wire with a white stripe. You'll know you've found it because it is bigger than the rest of the wires.

The grounds (there's several) are black with brown stripes, i believe.

Anything else?

Ok..I saw a white wire with some little hash marks on it..yellow maybe? Could not find a black wire that was bigger than the rest though. Can you get power from somewhere else if not? I'm the one doing 75% of work on Strauss's car BTW...if you didn't remember. I am tapping in to the wires down on the harness where it goes over the tranny. Any info is greatly appreciated!! Can't wait till we do the ignition system wiring!! AHHH!!

Is there a better place to tap into the wires? Just curious. I have found all of the rest of them. Where on the harness plug is the white wire and black wire?

I'd do the wiring where the harness is connected to the ECU. You'll find the power wire there... i would certainly get powe from that wire - it's switched with the ignition, powers the ECU, so the AFC and the ECU come up together, go down together... heck, i've got gauges powered there.

yes, white with little hash marks (NO STRIPES!) is the right one.

Thanks Dino for helpin us!

I just have to find the black one then...maybe just turn the switch on and use my test light to find the one that has power with ignition on. Thanks...

It all installed and working! Strauss..good job!!:) All I had to do is solder the connections..