| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Quick question for MSD installation? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=25011 |
|
25011, Quick question for MSD installation? Posted by JUNJUN712, Jun-20-02 11:30 AM On our coil harness which color(Black/blue or brown)is the trigger 1 and 2? Thank you... | |
|
25012, RE: Quick question for MSD installation? Posted by pn0ymahal, Jun-20-02 11:33 AM for sure the middle is your 12+... for the most left wire just look on the coil and see what #s are right above...same goes for the most right wire look what #s are on that side..thats it... | |
|
25013, RE: Quick question for MSD installation? Posted by JUNJUN712, Jun-20-02 11:38 AM Yeah, I get that theres 2&3 and 1&4 on top of the tower. I still don't know which one is the trigger 1 and 2... | |
|
25014, RE: Quick question for MSD installation? Posted by pn0ymahal, Jun-20-02 01:07 PM ok in your manuel what does it say about trigger 1 and trigger 2? it should say something? | |
|
25015, RE: Quick question for MSD installation? Posted by jamesman, Jun-20-02 03:48 PM it don't matter, just make sure when you cut one of the trigger wires you hook say that wire from the coil to the coil 1 side and trigger 1 to the ecu side and do the same for the other side. i do not think the 1 or 2 trigger really matters as long as you hook up the correct wires to coil 1 and trigger 1 on the msd | |
