| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Preparing for turbo.. what else do I need? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=24520 |
24520, Preparing for turbo.. what else do I need?
Posted by ourformerselves, Jun-13-02 07:08 PM
I have a bottle of fuel injector cleaner which I'll use about a week before I put on the turbo. I'm getting a new fuel filter this week, as well as new spark plugs to put in while doing the turbo install. What model # of spark plugs would you recommend?
What else will I need?
Thanks, Richard (97 ESi)
http://www.ourformerselves.com/richard/main.htm
BEST TRACK TIME -- 16.46 @ 86.03mph
----------------------------------------------------------
COMING MODS:
NER 1F Turbo Kit w/ Turbonetics T3/T4 S-Trim Ball Bearing Turbo || Autometer Phantom Boost, Air/Fuel Ratio, & EGT Guages || Autometer Full Pillar || HKS Type-1 Turbo Timer
CURRENT MODS:
AEM Cold Air Intake || Magnacor 8.5 Ignition Wires || NKG BKR6EVX-11 Spark Plugs || Front & Rear Strut Bars || Eibach Springs Pro-Kit || KYB AGX Adjustable Shocks/Struts || AF/X Underdrive Pulley || Pacesetter - Monza Exhaust System || OBX Racing Sports - B5 Bomb Tunable Muffler || Energy Suspension - Motor Mount Inserts || Bored Throttle Body
POINTLESS MODS:
Sylvania Cool Blue Headlights || Cobra Eyes Windshield Washer Blue LED Lights || Nokya Motorsports Sport Pedal Set
|
24521, RE: Preparing for turbo.. what else do I need?
Posted by XtremeRS, Jun-13-02 11:54 PM
oil sender remover socket, wd-40, zip ties, solder/iron, elect tape, all the necc tools, wire and relays for fuel pump if need be, new oil and filter, cat to stock down pipe gasket, antifreeze if you loose a lot. Thats all i can think of for now...but should be most the important stuff anyway..
|
24522, RE: Preparing for turbo.. what else do I need?
Posted by whodatt1, Jun-14-02 02:07 AM
vacuum lines... hehe
|
24523, RE: Preparing for turbo.. what else do I need?
Posted by Lee, Jun-14-02 02:13 AM
Xtreme did a pretty good job, don't forget the o2 socket - probably not necessary, but definately helpful.
Remember gauges are good. EGT, A/F, Oil pressure: the more you know the better off you'll be.
|
24524, RE: Preparing for turbo.. what else do I need?
Posted by vegasdsmr, Jun-14-02 08:13 AM
a fellow 2gntR.....
|
24525, RE: Preparing for turbo.. what else do I need?
Posted by ourformerselves, Jun-14-02 08:25 AM
Yea Sean, I'll be calling you up next Thursday to see if you're going to the track. I'm gonna get some times one last time before I go turbo. I'm looking at the weekend of July 27th for the turbo install.
Thanks, Richard (97 ESi)
http://www.ourformerselves.com/richard/main.htm
BEST TRACK TIME -- 16.46 @ 86.03mph
----------------------------------------------------------
COMING MODS:
NER 1F Turbo Kit w/ Turbonetics T3/T4 S-Trim Ball Bearing Turbo || Autometer Phantom Boost, Air/Fuel Ratio, & EGT Guages || Autometer Full Pillar || HKS Type-1 Turbo Timer
CURRENT MODS:
AEM Cold Air Intake || Magnacor 8.5 Ignition Wires || NKG BKR6EVX-11 Spark Plugs || Front & Rear Strut Bars || Eibach Springs Pro-Kit || KYB AGX Adjustable Shocks/Struts || AF/X Underdrive Pulley || Pacesetter - Monza Exhaust System || OBX Racing Sports - B5 Bomb Tunable Muffler || Energy Suspension - Motor Mount Inserts || Bored Throttle Body
POINTLESS MODS:
Sylvania Cool Blue Headlights || Cobra Eyes Windshield Washer Blue LED Lights || Nokya Motorsports Sport Pedal Set
| |