And those who have star kits knows what that means in third at 5k.
thats right no limit on boost.And I belive I blew my rings cause theres oil from the breather.Car idles like shit and smoke comes out of tailpipe,To top things off my oil pan gasket is blown causing oil to leak onto my downpipe causing more smoke. Any ideas on rebuild and where to get what parts cheapest (I'm at stage 1 now but during the super rebuild Im going to pipe an itercooler)Any suggestions will help GREATLY(can I use the 450 injectors ot of a stock gst)

first, run a compression test to see if you are blown up. even if its bad, there is a slim chance you just blew a head gasket, especially if you didnt stay in it very long. i dont know where you are located, but if you are anywhere near TN we could get ya set up with a rebuild. you can either get howells kit, or i can get ya Wiseco/JE Pistons, Eagle Rods, clevitte bearings, and a complete engine gasket kit from Mitsu for around 1300. that'll be all you need except for labor/ machine costs. machine work can run anywhere from 250-500 bucks depending on where you live, same with labor to pull the motor, btu i would suggest you pulling it yourself. if you can install a turbo kit, you can do that. and about the GST injectors, no, you cant use them, they are peak-hold, and we use saturated. you can however, use a number of mustang injectors, and Summit has some 30 and 42lb injectors that will work for a good price also i believe.

Does anybody know where to get stock pistons cheaper than dealer cost I might just sell my turbo kit

I have 4 stock SOHC Neon pistons with rings. Only have 40K miles on them. They will work perfectly.

Home mail-> Babybeclipse@hotmail.com

Work e-mail-> bkosobud@millinfo.com

Make an offer. Where do you live?

I also have stock pistons and rods and rings form my car and they are in good condition just sitting in my room.