180 miles till my centerforce dual friction is broken in.......i'll keep you guys posted when i finally puch it......i've had a slipping clutch since the turbo.....

anthony star II (E)

Hope you have better luck than I did.


Stan2gnt
Stan2va@aol.com
Stan2gnt@yahoo.com
95 Talon ES-I-NOS
http://members.nbci.com/FlyEsi/home.htm
You too can have a never updated site complete with old info and dated pics!

LAST EDITED ON 14-Dec-00 AT 04:10 AM (PST)

And me :(

Armond just informed me my clutch slips at 15psi and 4000rpm worse than it was before. How am I supposed to get a good run in if I can't even get the power down. I am just going to order a Stage IV Clutchmasters and be done with. Something I should have done a year ago when I started on this clutch escapade. This is my 3rd clutch - stock, which lasted me for a while at 8psi, but I burnt it out. Centerforce, which didn't make it very long at all, and now this custom modular setup. I am just having bad luck. And then I have Armond reminding me he put in his Clutchmasters and has never had a problem. :-/

MuRiX
97 Eclipse GS HRC Stage II
And a whole lot of other mods...
89 Accord LSi - yes it's mine :(
http://murix.home.icq.com/index.html

I have been waiting now for 2 1/2 months on my unorthodox racing stage 1+ to come in. first it took 5 weeks for the wrong one to come in..now when i call..they are waiting for the parts to come in to make the stage 1+ that i wanted. I am hoping this clutch can hold upwards of 14 lbs. of boost once i get the fuel i need. It better though...it is a 4 puck "carbotic" disk with an unsprung hub...engagement is gonna be harsh as hell. But, as long as it holds, i don't care. Ohh..and i got the nonmodular deal too since mine is a 95. I hope that helps it hold better too..


By the way chris, and anyone else getting a clutchmasters...if there is a way to check and make sure that the modular clutch you get is balanced before you put it on, i would do it. When shawn, the dude i got my kit from put his clutchmasters stage IV on, the whole car would have a horrible vibration no matter what RPM. The only thing we could figure out that it was the clutch was out of balance when they made it. It was only right after he put the clutch on that it developed the vibration. So, just a word of caution for you.


jason
95 GS turbo

My CM stage III worked flawlessly. I changed it when my clutch slave cylinder went out. Should have got it again.


Stan2gnt
Stan2va@aol.com
Stan2gnt@yahoo.com
95 Talon ES-I-NOS
http://members.nbci.com/FlyEsi/home.htm
You too can have a never updated site complete with old info and dated pics!