I need to know if anyone knows where the intructions for installation/operation are posted online for the Greddy TT? Also, does this sound about right? I have The clear blue TT with the black mounting braket on it. There is the red and black power and ground wires. Then there are gray, green, blue,purple and brown wires but they only extend about 5 inches each. So im guessing these will conenct with the wires in the harness and be long enough to reach where they need to go right? Where exactly will this be plugging in? and approx how long are the wires on the harness? Thanks for your help!!

We have the 2 ignition wires setup...


Brown is parking brake, Purple is speedo (unnecessary).

http://www.greddy.com/technical/TurboTimer_Frame.htm

http://www.greddy.com/technical/pdf/TurboTimer.pdf

Thanks! I guess checking the company website would have been a good idea lol.

One more thing, which is the correct harness to buy. Is this the right one?(sorry for the long URL) http://www.optauto.com/webstore/product_information.asp?number=TP-15930013&variation=&aitem=5&mitem=15&back=yes&dept=114

I just want to make sure im gettin the right thing. Thanks

anybody have the directions for the hks tt? i have the harness but i cant find where to connect it. help. thnx

"Proud to be, a 2gnt" (was)


-mitsuman

Turbo:
1. HRC STG 2
2. Blits SS BOV

Exhaust:
1. Greddy Power Extreme

Exterior:
1. C/F hood du!!

Ride:
1. Motegi MR7 17'' wrapped
in yokohama A550v
235/45/17
2. H&R Sport Springs

Sound:
1. sony xplod cdxm620 deck
2. 2 10'' 800w Visonik subs
3. A18O1X Audiobahn
amp

Electronics:
1. HKS TT(sitting in room)
2. Apexi S-afc(sitting in
room)
3. Corbin's A/F
guage(sitting in room)

Body:
1. Blitz front end(sitting in
room)

Fun mods:
1. "Nozzel mod"

Wanted:
1. Injectors
2. Howell rebuild kit.

Im pretty sure there are instructions for the HKS TT on www.vfaq.com in the Electrical section

Hey guys, can anyone tell me how to go about installing a greddy turbo timer on my 420a turbo car?

Originally posted by FreikDog
Hey guys, can anyone tell me how to go about installing a greddy turbo timer on my 420a turbo car?

Buy a TT harness for an eclipse (the one for a 4g63 works just fine) Take the cover off the steering column and find the ignition harness, unplug it, plug the turbo timer harness in then plug the turbo timer into the harness and you should be good to go if I remember correctly. Might be one or two more wires but I think that was a special case for me since the harness plug was cut off the back of my TT.