| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | s-fmu part# for 1.5/2:1 etc |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=23158 |
|
23158, s-fmu part# for 1.5/2:1 etc Posted by pn0ymahal, May-26-02 07:03 PM what part #s do i need to get to get a 1.5:1 or a 2:1 gain for my s-fmu? i was looking on vortex paper they gave me.. it says, use ring #6x070-041 with assembly #6z170-010 or #6z170-015. #6z170-015 will give approzimately 1.5:1/2:1 rate of gain. #6z170-015 will be slightly higher... well so which part # will give me a 1.5:1 gain and which one will give me a 2:1 gain? i plan to get 440cc later and get a disk of 2:1 so my max fp at 9psi will be 56psi static 38 idle about 26-27...also the 2.47 disk is a gain of 3:1 right? and the 2.22 disk is a gain of what? | |
|
23159, RE: s-fmu part# for 1.5/2:1 etc Posted by Corbin, May-28-02 12:22 PM My S-FMU instructions had a typo in the part about the 1.5/2:1 disk. It seems to be only one disk/ring. The increase is between 1.5:1 and 2:1. I just called up Vortech and asked them what I needed. They sent me the right parts. I sold my S-FMU along with 1.5/2:1 disk to "rfpunch". He might be willing to part with it since he's got stock injectors (and doesn't need that disk). | |
|
23160, RE: s-fmu part# for 1.5/2:1 etc Posted by pn0ymahal, May-28-02 01:51 PM so corbin, when u called vortex what disk (rise rate) did u get? is it one disk between 1.5:1to 2:1? or was it the 1.5:1? or the 2:1? did the disk with part# they sent u match any of those on the sheet? | |
|
23161, RE: s-fmu part# for 1.5/2:1 etc Posted by Corbin, May-30-02 11:04 AM They said that the 1.5/2:1 was a single disk/ring combo that raised pressure anywhere between 1.5 and 2:1. It was one disk and one ring. One part # was the disk and one # was the ring. Talk to them and they should clear it up. | |
|
23162, RE: s-fmu part# for 1.5/2:1 etc Posted by pn0ymahal, May-30-02 02:21 PM thanks dude ill give them a call | |
