| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | jeep 60 mm with turbo |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=22889 |
22889, jeep 60 mm with turbo Posted by BLACKWIDOWDSM, May-22-02 12:21 PM
Will it make a much bigger difference if i get the jeep TB since i am turbo? I am thinking it should make enoguh difference to go ahead and buy one. any help is apreciated...

"When you reach real ability you will be able to become one with the enemy. Entering his heart you will see that he is not your enemy after all." -Tjusii
|
22890, RE: jeep 60 mm with turbo Posted by Fast420A, May-22-02 12:46 PM
Yup much bigger difference than a 55 mm
________________________________________________________________________________________ current status - No 3rd Gear synchro

 http://hometown.aol.com/ohshootuhh/ www.Fast420A.com
|
22891, RE: jeep 60 mm with turbo Posted by Manek1, May-22-02 12:50 PM
jeep TB fit our cars? which jeep? how big is it?
|
22892, RE: jeep 60 mm with turbo Posted by Fast420A, May-22-02 12:57 PM
Where the hell have you been?
The 60mm Jeep TB from the 4.0L auto tranny cherokee. There is a little modification needed but it's MUCH BETTER than paying $250 for a bored TB or something like that.
http://www.neonspeedlab.com/howto/howto_jeeptb.htm
There's another write up but I on;y have it bookmarked at work so you will have to wait about an hour or until someone else posts it.
________________________________________________________________________________________ current status - No 3rd Gear synchro

 http://hometown.aol.com/ohshootuhh/ www.Fast420A.com
|
22893, RE: jeep 60 mm with turbo Posted by Manek1, May-22-02 03:22 PM
i've been off the board for over a year that's where.......started coming here about 3years ago. where have you been? so you's want to bore the intake manifold also.....how much would that cost?
|
22894, RE: jeep 60 mm with turbo Posted by mitseclps, May-22-02 04:21 PM
50$ for a dremmel and 5$ for extra sander bits.
|
22895, RE: jeep 60 mm with turbo Posted by MetalJim, May-22-02 04:27 PM
The Neon writeup - http://www.geocities.com/lover232/Enjoy.html
Talon95Stang did it and found a couple of neuances -http://www.keithurbanfans.com/talon95stang.html
just do it :thumbsup I'm not even turbo(yet), but I can't wait for this mod. I hear that you should be able to find one in a junkyard for uner $50
 95 Eclipse RS : 5 speed Gude cams : test pipe : CAI : Dual air horns : Kenwood KDC 5000 : AutoCommand remote start incomming - lower strut bars : AFX UDP
|