| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | pocket logger gave me a PO106 |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=22553 |
22553, pocket logger gave me a PO106
Posted by ecl98pse, May-19-02 03:23 AM
i'm guessing that means i need a new map sensor? can anyone clarify? BTW the car wouldn't stay running for more that one second.
|
22554, RE: pocket logger gave me a PO106
Posted by mitseclps, May-19-02 07:26 AM
a dead map wouldn't do that.
|
22555, RE: pocket logger gave me a PO106
Posted by speedracer21, May-19-02 08:10 AM
i couldnt find any po106 code in the manual...
|
22556, RE: pocket logger gave me a PO106
Posted by ecl98pse, May-19-02 11:15 AM
here is what the pocket logger said...
PO106:
Manifold Absolute Pressure/
Barometric Pressure Circuit
Range/PerRange/PerRange/Per
Range/Per
(that is exactly how it looked on the logger screen)
BTW the car decided to start today when i went out to try. there is a CEL and the logger still reads as above.
|
22557, RE: pocket logger gave me a PO106
Posted by DarkOne, May-19-02 02:14 PM
http://www.2gnt.com/www/files/obd2codes.htm
|
22558, RE: pocket logger gave me a PO106
Posted by pocotheeskimo, May-19-02 03:00 PM
Do you have an AFC installed?
Gary
|
22559, RE: pocket logger gave me a PO106
Posted by BLKOUT, May-20-02 03:38 AM
Long time no post guys. It's funny that I logged on and found this post because I have the same dilema. I know that the AFC sets that code (61), but has anyone found a way around it yet? Up until now it hasn't been a problem, but now my state changed the emission test to strictly OBD-II style testing and if you have any CEL you fail. I can work around the AFC but then I don't think the ECU will be able to work with the 440's enough to pass the test. Any suggestions or help guys would be much appreciated. Thanks and hopefully now that I have my car back together I will be back on the board more often.
|
22560, RE: pocket logger gave me a PO106
Posted by ecl98pse, May-20-02 08:15 AM
nope, no SAFC
|
22561, RE: pocket logger gave me a PO106
Posted by Avenger EST, May-20-02 06:28 AM
a dead map sensor will do that. check your map readings on your datalogger.
A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............
|
22562, RE: pocket logger gave me a PO106
Posted by ecl98pse, May-20-02 08:16 AM
Avenger EST what should the map reading be? ihave a VC-2, would that have anything to do with it?
|
22563, RE: pocket logger gave me a PO106
Posted by ecl98pse, May-20-02 10:11 AM
i'm now also getting a PO171:system too lean (bank 1). is this the o2 sensor?
|
22564, RE: pocket logger gave me a PO106
Posted by mitseclps, May-20-02 02:37 PM
yeah, bank 1 is the o2 sensor up front. rite now i have both a busted o2 AND map sensor....it's running like shit to say the least.
|
22565, RE: pocket logger gave me a PO106
Posted by ecl98pse, May-21-02 12:45 AM
>yeah, bank 1 is the o2 sensor up front. rite now i have both
>a busted o2 AND map sensor....it's running like shit to say
>the least.
same here:(
|