| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Do you tap the intake for new maps? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=21618 |
21618, Do you tap the intake for new maps?
Posted by JustOne, May-08-02 12:29 PM
Do you drill and tap an new hole in the intake for the new map sensors? and Do you still leave the stock one in place?
|
21619, RE: Do you tap the intake for new maps?
Posted by 992gnt, May-08-02 12:42 PM
Leave the stock one in WITH the FCD hooked up. You can either drill and tap the manifold or use a couple of tees in existing lines. Vacuum leaks can be a real killer, so take you time.
|
21620, RE: Do you tap the intake for new maps?
Posted by JustOne, May-08-02 12:44 PM
HRC told me to take the FCD off.????
|
21621, RE: Do you tap the intake for new maps?
Posted by 992gnt, May-08-02 12:57 PM
Funny, Bill told me to leave it on...
|
21622, RE: Do you tap the intake for new maps?
Posted by JustOne, May-08-02 01:20 PM
I think I will keep it on. The guy on the teck line wasn't to sure sounding. GREAT TECH.
Thanks
|
21623, RE: Do you tap the intake for new maps?
Posted by Avenger EST, May-08-02 04:49 PM
If you read on my site about 001, I found out info on what happens when you remove the fcd with the dfi.
A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............
|
21624, RE: Do you tap the intake for new maps?
Posted by fly1, May-08-02 01:33 PM
You shouldn't have to drill another hole in the manifold. Just get another "T" to run off any one of your existing vacuum hoses.
|
21625, RE: Do you tap the intake for new maps?
Posted by Super20G, May-09-02 08:18 AM
Armond told me to get rid of the fcd if you have the dfi, I didnt really ask why, just listened, armond has never steared me wrong yet :-)
|