| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | sould i replace it its all fu**ed up? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=20572 |
|
20572, sould i replace it its all fu**ed up? Posted by qwad65, Apr-25-02 02:19 PM my oil pan is kinda smashed iam going turbo in a month should i get a high performance on if so what will the diff be between stock one? | |
|
20573, RE: sould i replace it its all fu**ed up? Posted by toykilla, Apr-25-02 03:02 PM if your taking the oil pan off might as well get a rebuild kit and do the whole job. | |
|
20574, RE: sould i replace it its all fu**ed up? Posted by Super20G, Apr-25-02 05:05 PM You dont need a different oil pan, just get a new oem one, or pull one off a junkyard engine. toykilla, are you suggesting to pull the pistons and rods from the bottom? | |
|
20575, RE: sould i replace it its all fu**ed up? Posted by Corbin, Apr-25-02 05:03 PM I wouldn't worry about it unless you have a hole in it. When you pull the pan off to put the return line in, you can beat out any dents. I put a used oil pan on (already had return line in it) with my turbo. The bottom was so dented that it touched the oil pickup and wouldn't bolt up. I just beat the dent out and put it on. | |
