Hey guys, is this a possibilty that a company like for example "JET"
Take our ECU's and reprogam them to compensate for boost or fuel pressure changes?

NEVER USE JET. It is possible though, it just hasn't been performaned yet and is working on one for us.

Skrilla
'97 Base Talon NA
"Technology is the Only Substitute for Displacment"
"Peace and Turbo Grease"

We should start looking more into the Chrylser turbo ECU's..
They are off of the older modem turbo chryslers 1985-94'
So they would have pre-obd and obd1 ecu's.

... Would you know where to look, I have no idea.

Skrilla
'97 Base Talon NA
"Technology: The Only Replacement for Displacement"
"Peace and Turbo Grease"

Highly unlikely to work since the 420A started as a clean slate (unlike hondas that seem to have no problem running different model ecu's). I think the best bet would be reprogrammed mexican 2.4L turbo stratus ecu's. Since its of the 420A family all the sensors will likely be the same (except those related to positive pressure) and its already programmed to accomidate boost. All that would seem to be required is to reprogram it to run everything in reverse (like ours opposed to the neon) and make sure the harness wiring lines up with the right sensors. SOHC neons work with DOHC ecu's and vise-versa (and the neon and stratus ecus appear to physically fit our cars) so I think its workable in the hands of the right programmers (which sure as hell aint JET). On a side note if those with 96 up models could use these ecu's to accomidate for boost electotronically it would save the trouble of running return lines.


Stan2gnt
Stan2va@aol.com
95 Talon ES-I-NOS but T soon!
http://members.nbci.com/FlyEsi/home.htm
You too can have a never updated site complete with old info and dated pics!

Actually For a year or so, I have been toying with the idea of just using the MOPAR 2.0L DOHC Off-Road PCM (ECU). Obviously its intended for Neons, however I believe that if i wire it in (yes WIRE by WIRE! - I have done crazier stuff before) it should work fine.

Other alternative would be to custom map my PCM. Anyone know if it has an E-PROM????

A friend of mine has offered to help do it for me. He designs (and makes) Fuel injection coversion systems for Big-Block Carbureted Chevy, Ford and Mopar Engines....

So I would like to know if we indeed do have an E-PPROM in our PCMs in order to do this, or even better if anyone can get the progam information of the E-PROM on a computer file...

Guy
RS_Guy



13.9sec @ 105mph passes
w/ Blown piston rings,
on Stock Internals
at 10psi Boost....

If our ECU has an eeprom, then we can program it and do mods like the do at www.tmo.com !!!!!


l e o n

...it's whe n. RS_Guy try talking to Howell Automotive

Skrilla
'97 Base Talon NA
"Technology: The Only Replacement for Displacement"
"Peace and Turbo Grease"