| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | how to hook up Greddy type-s | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=20083 |
20083, how to hook up Greddy type-s
Posted by ecl98pse, Apr-19-02 07:55 AM
i'v got the gist of it but the type-s has 2 hose barbs and an adjustment on top. what do i set the adjustment at? and how should i hook up the hose(s)BTW it will be feed boost directly from intake mani.thanks
|
20084, RE: how to hook up Greddy type-s
Posted by pn0ymahal, Apr-19-02 09:04 AM
only hook up the top nipple to the intake manifold leave the bottom open.. the top is to adjust how hard or soft meaning if your getting compression surge then its to tight but if it does not blow off its way to soft etc...
Michael 99gs
Boost It!
Mods:
no time to put in yet:315cc injectors, & crane ignition.
Hrc Stage 2
S-FMU
Greddy Type S Bov
VC-2
Road Race Catch Can
Greddy Profec B & Switch
Apexi WS Catback
Super Afc
Autometer Boost,
Egt,Tranny Temp Gauge & Cooler
Air/Fuel Light & Digital
Tokico Adjust Struts
Eibach Pro Kit Springs
Front & Rear Upper Bar
CarCraft Interior
Sound System= Bring it On
|
20085, RE: how to hook up Greddy type-s
Posted by ecl98pse, Apr-20-02 04:43 AM
where should i set the adjustment for 7psi?
|
20086, RE: how to hook up Greddy type-s
Posted by fly1, Apr-20-02 08:08 AM
For 7 psi, very minimal; maybe only about a half turn of the allen screw. The only way to really find out is to turn the allen screw at the top of the bov counterclockwise, until it stops, then give it a 1/4 clockwise. Take it for a spin, and go WOT. Listen to the sound. If it's not venting, then turn it another 1/4 turn, and go WOT again. I run 15 psi daily and mine is only set at about a full turn. You want to hear that tight pisssshhhh sound.
|
20087, RE: how to hook up Greddy type-s
Posted by ecl98pse, Apr-21-02 03:30 AM
thanks, but will i be able to hear it since i have an extenal wastegate?(star stage 2)
| |