Ok in the HRC install directions the diagram says to run a line from the BOV to the intake mani...more specifically the pipe that is all the way on the left of the 3 pipes there in stock form...where does the pipe on the left run to?? am i just supposed to tap into it? b/c everywhere i need a T it says to use one and it doesnt say to use one on that pipe...it just says to run it straight to the BOV...im confused...tia

not sure if there is an extra "nipple" there that is not being used that you can put the vacuum hose in. otherwise either t it to another of the vacuum lines or tap it directly to the intake manifold (if you do this might as well tap all the other lines directly to the mani also)

I would recommend running a line from the manifold directly to the bov, people have been having problems with bov stutter when they t that line. i have one line running from the mani to the bov and the other 2 i tee'd for all the other accessories.
lates
james