| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Chris or Joe! What are your settings on your S-AFC? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=1939 |
|
1939, Chris or Joe! What are your settings on your S-AFC? Posted by MWC, Feb-22-01 05:17 AM If I have been givin the right info, you guy's have 440'a as well as S-AFC's. I would like to know if that is true, what you have them set for? You know the whole "Nine". Ins and outs and highs and lows, so I know that I am tuned as well as can be. Also what fuel preasure are you guy's running at idle and at boost? I would like to make sure I have my settings right before I build a new motor and blow it like this last one. I do relize that I will still have to tune it, but at least I will be in the "ball park" to start from. Thanks guy's! And if there is anyone else out there that has their 440's in and S-AFC tuned with a turbo application, feel free to reply as well. | |
|
1940, RE: Chris or Joe! What are your settings on your S-AFC? Posted by BLKOUT, Feb-22-01 06:14 AM Sorry dude, can't help you on this one. I do have the 440's & S-AFC but I don't have any of it installed yet. Up until now I've been running stock injectors & no AFC. My set-up this year is going to be completely different that it was before. Hopefully Chris can give us both some insight. | |
|
1941, RE: Chris or Joe! What are your settings on your S-AFC? Posted by MuRiX, Feb-24-01 03:10 AM Here is some relevant info - keep in mind I have 400's though, but these will be changed out to something much larger very very soon. idle -35 psi, should be about 32psi for 440, low settings - no more than -16% at low rpms and no more than -12% at high rpms. High settings - no more than -10% at low rpms and no more than -6% at high rpms. This is with fuel set to 70psi at full boost. That is one of the key parts before setting the AFC. | |
