| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | about sizing of service port on fuel rail |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=19318 |
|
19318, about sizing of service port on fuel rail Posted by Kirby, Apr-08-02 09:34 AM i believe it's a -6an fitting for the service port on the fuel rail, am i correct? and secondly where can i find a an fitting will they have this at a hardware store or would i need a performance shop? | |
|
19319, RE: about sizing of service port on fuel rail Posted by mkerley, Apr-08-02 11:43 AM If it's on the end of the fuel rail, it's -4an and you can get the fittings at a hardware store or plumbing type store. If you can't find on, go to anplumbing.com (i think that's the name) or summitracing.com has them as well. | |
|
19320, RE: about sizing of service port on fuel rail Posted by Corbin, Apr-08-02 12:43 PM I've never been able to get them at hardware or plumbing stores. Mkerly has the size right; it's -04 AN. I believe that AN has a 37 degree flare and SAE is 45 degree flare. Alot of hardware stores carry SAE flares. Check out summit for the AN fitting or get a local shop to order it. A -04 female to 1/8 NPT male and NPT coupler will work nicely for your fuel pressure gauge. Your fuel pressure gauge was working properly all along. I forgot that your stock FPR was still operational and the FMU is just a riser. I won't go into details, but we put the sensor in the wrong place to work at anything less than 0 boost. It should be in the fuel rail. | |
|
19321, RE: about sizing of service port on fuel rail Posted by mkerley, Apr-09-02 03:05 AM I honestly don't know which flare I bought (it's the correct one though), but I found mine at a local industrial hydraulic store. | |
