this is the first day after the install. When i started her up this morning it was smoking with grey smoke for about a minute, and the rpms were idleing between 1/2 and 1k. I need help, should the vac line from the fmu to the manifold be tight with no slack? should the in and out lines on the fmu be the same size? the out line to the tank is 3/16 is that normal or should it be bigger, because the inline is 1/4 i believe. Plus the wastegate's bolts unbolted ....so i know something is up with that someone help me out....my o2 sensor is powder white on the sensor.... someone help me.

john 2gntT

well first off u want to make sure your fuel pressure is correct...what year car do u have?

just make sure the idle pressure is around 45-50psi

mark