well, my star stage 1 and custom FMIC is ready to go on. now all i have to do is get the pistons/rods here and it will be boost time. my goal is 12psi, and i was wanting to know what the best route to take is, fuel wise. i had planned on getting the 30lb accel injectors from summit, but it seems that with DeanoD's new findings, these wouldnt be quite big enough. how about a 36lb injector? you guys think this would be enough? i was wanting to be able to run 12psi without having to use a piggyback(like SAFC) but it seems that ill have to. opinions and ideas are welcomes. as are places to get injectors if my 36lb injector idea wont work. thanks a lot.

i also have many questions about fuel and injectors. i think some one or all of us should put our knowledge together and make a "we've seen this before" post. try and get estamites on what horsepower a certain psi i will give and then use corbin's page and plug in all the numbers and then we can see what kind of fuel injectors and fuel pump and regulator we should use. anyone else agree on this? i would do it but i don't know any estamites on psi and horsepower.

something like
10-12psi ~275horses (these numbers are just randomly picked)
12-15psi ~300
15-18psi ~325
18+psi ~350

this would help a lot of people i believe

http://www.geocities.com/vttalon/tech.html



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Hey that is a good idea. I'm into that. I got star stage II,I also wanted to know what to do with the fuel injector when it gets to that psi with out adding the afc. anybody?

i know what corbin's site is but i need horsepower estamites to do the math.

so show me the estamites.

can anyone help me with getting horsepower for certain psi? anyone out there that has dyno slips please post mods and psi. common guys this will help a lot of people out.