| Go back to previous topic | | Forum name | Turbo/Nitrous Tech | | Topic subject | Need help with VC-1? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=16852 |
16852, Need help with VC-1?
Posted by milt97rs, Mar-05-02 04:09 AM
I bought a custom turbo from a guy and im trying to hook up the VC-1, but im not sure what kind of FCD it is but the wires are diffrent colors than the ones on the splitsecond vc-1. And im not sure which wires hook up to what. It has four wires....red, black,white,and green. Can someone help me out??
|
16853, RE: Need help with VC-1?
Posted by DarkOne, Mar-05-02 04:15 AM
red - 12+, black is ground. I believe green is FROM the MAP sensor, and white is TO the ECU. Hook it up that way, if it doesn't work, the switch them around ;-)
|
16854, RE: Need help with VC-1?
Posted by Erik, Mar-05-02 04:18 AM
Hey put a post up if you have any luck with the VC-1. I have one sitting around and I'm thinking about using it b/c the "black box" I have now is kinda glitchy.
|
16855, RE: Need help with VC-1?
Posted by milt97rs, Mar-06-02 12:17 AM
OK cool...Im not exactly sure where the map sensor is or what wire to tap to though?? And what color wire is it on the ecu? Thanks!
|
16856, RE: Need help with VC-1?
Posted by whodatt1, Mar-06-02 01:12 AM
its been a while since I last looked but I think the MAP sensor wire is the yellow with the black stripe.
I cut it near the ecu and wired the vc1 there.
|
16857, RE: Need help with VC-1?
Posted by milt97rs, Mar-06-02 02:39 AM
Awesome!! Thanks guys!!
| |