Sup fellaz, like before, (all together now)
IF IT'S NOT ONE THING THAN IT"S ANOTHER.......

I need to find somewhere to buy the gasket that goes between the exhaust manifold and the actual turbo t3/4 itself. It should be a pretty small gasket about 2in by 3in.

Once again, I do NOT need the exhaust manifold gasket (had the hardest time telling that to discount autoparts) Just the smaller one that goes between the manifold and turbo itself?? anywhere local? or do I have to order it off a performance shop?? My old one kinda...umm...blew out?? a small chunk of it from the middle just went pooooof....disappeared leaving a nice hole right there blowing all the nice exhaust gases in my face everytime I open er up. Well let's hear em fellaz



Mick

Shogun Body Kit
GTR Flared Wing
Arospeed Muffler
Half red-Clearm Tails
QT s-08 18"
Toyo Proxes Z4 215/18/35
..some turbo thingy me and Ray pieced together...

Try Emailing Wyatt because he should have some.


current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Or perhaps somewhere else I can order it from?? Wyatt is a verybusy person from what I hear.....



Mick

Shogun Body Kit
GTR Flared Wing
Arospeed Muffler
Half red-Clearm Tails
QT s-08 18"
Toyo Proxes Z4 215/18/35
..some turbo thingy me and Ray pieced together...

Wyatt wouldn't have one.. when i asked him the same question a year ago, his answer was "It shouldn't need a gasket"

RRE has on in thier hacker-tweaker/DIY section, i believe.

why don't you just get some gasket material and make your own. gaskets are not that hard to make..

When you're talking 1500* internal temps and 500* surface temps.. yeah, they are kinda hard to make. You can't just drop some RTV in there, unless it's the heavy duty 1500* rated black goo..

Come on Dino, just spread some roofing tar on there, It'll seal!





current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

I got my gasket from NAPA store two blocks away from my house for $9.99. Part no. F7414, its metal and it is actually a gasket for T3 turbo. Hope it will help.

YOU DO NOT NEED A GASKET. Cast iron to cast iron does not require a gasket. unless the manifold is made of something different than the turbo (such as HRC Stainless steel vs cast iron turbine) there is no benefit to a gaket unless you are trying to insulate heat from tranferring to the manifold. I wondered myself until I read the above in Corkey bells maximum boost. The wastegate flange would be an ideal place for a gasket since tranferring of heat it detramental to wastegate life. Those are standard turbonetics found anywhere (RRE).

actually stan, remember I got an adapter plate made up for me to fit my t-25, I'm just using the star manifold in my custom set-up, but thanks anyways, JUNJUN, thanks bro, I will check that out tomorrow morning!



Mick

Shogun Body Kit
GTR Flared Wing
Arospeed Muffler
Half red-Clearm Tails
QT s-08 18"
Toyo Proxes Z4 215/18/35
..some turbo thingy me and Ray pieced together...