Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectHow does your HRC-provided Cartech fuel pressure regulator perform?
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=13291
13291, How does your HRC-provided Cartech fuel pressure regulator perform?
Posted by Kiku, Jan-11-02 05:17 AM

Poll question: How does your HRC-provided Cartech fuel pressure regulator perform?

Poll result (0 votes)

  

13292, Please respond only if you have an HRC turbo kit
Posted by Kiku, Jan-11-02 05:18 AM
And provide:

1) Stage number of the kit
2) How long you've had your kit


Thanks.
13293, RE: Please respond only if you have an HRC turbo kit
Posted by JasonESi_T, Jan-11-02 06:32 AM
I said it works "ok" b/c it did and I didn't adjust it all the time, I started the car, b/c there wasn't a whole hell of a difference I would have made with an adjustment. It would always be high when it was cold and always go back down after it warmed up. Also, for the time I had it, it did provide me with the ratio I had wanted (kind of).

Here's the downside, the damn thing was hardly ever stable. It would fluctuate like mad, until I took it apart, and continued to fluctuate during boosted operation. When I say fluctuate, I mean the needle to the FP guage would not be stable and would quiver 2-3 psi back and forth to what ever given fuel pressure it was supposed to be at. Moreover, as it got older, I noticed that upon immediate WOT, going under boost, I would read lean. Under slow transient throttle pressure onto boost, it would read rich. This in my mind, meant that the FPR had a difficult time having the boost shoved down its throat...err diaphram.


After inspecting the unit from its innerds, I'm of the opinion that all of these problems are related to two major parts. One, a shitty rubber diaphram that has some sort of wanna-be air pocket inside, AND a shotty static spring. You might as well find one (and I'm exagerrating here) of these springs in a retractable pen, but in all seriousness, it really is a weak looking spring when you compare it to the Vortech, as well as the better conceived diaphram that isn't made of rubber, nor does it require an air pocket inside, which just seems dumb IMHO.

oh yes...
>
>1) Stage number 2
>2) For 18 months...20 thousand miles.

Conclusion:
The FPR is functional (or "ok", if you don't have one with defective parts)...but just barely.


13294, RE: Please respond only if you have an HRC turbo kit
Posted by Matt_95tgs, Jan-11-02 01:28 PM
I voted for the ok option as well. Mine is consistant, but not adjustable. I live in michigan, so the temps/humidity/etc... fluxuate all the time and I have seen very little fluxuation in pressures. The only prob I have with it is that I can't adjust the peak psi. No matter how much I turn that stupid thing, my WOT pressure doesn't barely budge. My air/fuel reads rich all the time at WOT and my egt's have been the same since day 1.

Matt
HRC Stage 2