hey dude i got a favor to ask of you.
since nobody else will help me with my problem with my blitz dc fatt (i know you have this TT). i don't have the directions in english for the damn thing and i don't know what i'm doing with it. there's like E-T and A-T and more and i don't know what they mean. if someone could scan the manual and tell me what i'm doing it would be very helpful. is there any way to change the temp reading to farenhiet.
thanks

Nope temp readings only in celcius.

thats wierd urs only came w/ japanese instructions :/ Mine came w/ Jap and English

I dont have a scanner, but i can try and help:

To switch Modes, you hit the Power button. the modes come up in this order:
1-Auto Timer
2-Manual Timer
3-Temp
4-Voltage
5-Stop Watch
6-Lap Time Display
7-Off

for the auto-timer modes:
A-L=rpm low setting, calculates time based upon time spent above 1800 rpm
A-H=rpm medium, time above 1200 rpm
A-S=rpm high, time above 900 rpm

E-L=elapsed low setting, calculates time based on how long car is on, roughly 55 seconds per hour
E-H=elapsed high, ~130 seconds per hour

When using the automatic timer modes, you can select a minimum time, and then all the above times will be added to that. When "Timer A" is diplayed in the upper corner, press the minute button once, and the screen will flash, then press the second button to set the base time (0-50 seconds)

For the manual timer, just press the minute and second buttons to select how long you want the car to run, 0-10 minutes

Temperature - when in temp mode, you can switch b/t auto and manual timer by just pressing the minute button instead of having to go thru the main menu again.

Battery Voltage - same options as the temp setting

Stop Watch- record times up to 9 min, 59 seconds. use the minute button to start and stop, use the second button for the lap button. you can save up to 5 laps. to clear the time, hold the second button for 5 seconds.

Lap Times - in this mode, press the SECOND button to scroll thru and view recorded lap times. hold the second button for 5 seconds to clear all times

Off- du'h ;)



Contrast- when 1st turned on, u can adjust contrast by pressing the minute and second button (values of 0-100)

Bar Display in E mode of auto timer - you can have 4 different bar display styles while using the E-mode. to switch b/t them, while in E-Mode, press the second button down for 3 seconds. the 1st 3 are automaticlally moving bars, the 4th moves according to ignition pulse

A and B Switch - A-B switch on the brain, A is for most vehicles, B is for vehicles w/ low ignition pulses.





Does that Help? hehe, if not, i might be able to scan them next week, but this really is what the manual says:)

thanks