Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectTURBO TIMERS
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=12714
12714, TURBO TIMERS
Posted by dSTARm619, Dec-26-01 10:36 AM
Is installing a turbo timer hard??? Can anyone give me some advice on how to install it. I'm getting the Blitz FATT one so will I have to buy a harness? What kind of harness would I need?
12715, RE: TURBO TIMERS
Posted by Kory, Dec-26-01 12:26 PM
yes harness and harness for 4g63 is good too


96RS ~ full 99GS special body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, b&m sS, magecores & NGKs, S-AFC, Sparco Torino, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, sound system, a shit load more.

97GSX ~ K&N FIPK, Greddy IC Piping, Type S bov. To all the haters _|_ tia

12716, RE: TURBO TIMERS
Posted by eclipsekaiser, Dec-26-01 04:39 PM
if you are like me and too cheap to buy the harness, you can always hardwire it.

I would highly reccommend the harness, as it is only plug and play. very clean.
12717, RE: TURBO TIMERS
Posted by eclipzGST, Dec-26-01 06:08 PM
I got the BLITZ Dual TT w/ the harness and it was cake. Took about a 1/2 hour. the hardest part was running the vacuum hose through the firewall for the built in boost guage.
What you do is unplug the factory haness, plug in the new harness and plug the factory one into the other end on the new one. Simple as that.
I recommend the harness. It makes it SO simple.

-Tony 98'GST



http://eclipzgst.dyndns.org
AIM: YNOT420247
12718, RE: TURBO TIMERS
Posted by aj, Dec-27-01 02:42 AM
can anyone tell me where and what the harness I need to tap into looks like(wire color how many)?TIA
12719, RE: TURBO TIMERS
Posted by RyaN95i4, Dec-27-01 02:46 PM
the harness that plugs into your ignition. just pull the bottom part of the steering wheel column trim piece off, its the only harness there :)
12720, RE: TURBO TIMERS
Posted by aj, Dec-27-01 02:51 PM
Right on.Thanks bruh'