| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Oil feed line size |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=109598 |
|
109598, Oil feed line size Posted by 99eclipse420a, Feb-04-13 09:49 PM I have a Turbonetics 50 trim turbo and need a oil feed line solution. I am currently over seas and it's hard for me to know what to buy. Also, do I need to restrict oil pressure to the turbo? I have seen a kit from CI that looked good but, would like a second opinon. | |
|
109600, RE: Oil feed line size Posted by Gruff511, Feb-05-13 11:39 AM A -4AN line should be sufficient But I wouldn't get from CI you will probably be waiting months before you see anything from them. And if your feeding it from the block you should use a 1/16th restrictor. | |
|
109601, RE: Oil feed line size Posted by 99eclipse420a, Feb-06-13 11:07 AM Thanks a lot that helps me so much | |
|
109602, RE: Oil feed line size Posted by 99eclipse420a, Feb-08-13 02:07 AM here is the turbo | |
|
109611, RE: Oil feed line size Posted by Socal420aT, Feb-27-13 06:54 PM -4 line will be good and you wont need a re-stricter, That is a turbonetics turbo and has a oil filter on it, the filter will act as a re-stricter. and +255458855225 On not getting from Ci they suck balls | |
