| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | First time on the dyno 297 hp / 270 ft lbs |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=108751 |
108751, First time on the dyno 297 hp / 270 ft lbs
Posted by fresh95, Jun-06-11 03:08 PM
I'll start out with a little background info on my car.
95 Eclipse GS
Turbonetics t3 super 60
Treadstone manifold
3" downpipe 4" catback
Portfueler with 480cc injectors
JE 8.8 pistons
Eagle rods
Melling oil pump
Pt lifters/rockers
ARP head and main studs
MLS headgasket
3.55 trans with OBX lsd
Spec stage 5+ clutch
Stock ignition
Stock intake manifold and throttle body
Stock cams
15psi on 93 octane
I bought the car 6 years ago and have been slowly building it ever since. The car has NEVER been to a mechanic. I do all my own work.
I did all the tuning with the portfueler myself as well.
Finally took it to the dyno yesterday and was pleasantly surprised!
297 horsepower
270 ft lbs torque
It was close to 90 degrees and humid.
With a little more tuning, 300 hp will be no problem!
Any thoughts?
|
108752, RE: First time on the dyno 297 hp / 270 ft lbs
Posted by barza21, Jun-06-11 03:22 PM
Congrats, dude! Those are really good numbers. Specially considering that it was done on stock cams and ignition.
Good numbers. Enjoy.
|
108753, RE: First time on the dyno 297 hp / 270 ft lbs
Posted by bullettdsm, Jun-06-11 04:15 PM
Sweet numbers with the limitations you've got on there. Congrats. Dyno sheet?
|
108754, RE: First time on the dyno 297 hp / 270 ft lbs
Posted by 420agreenvilleSC, Jun-06-11 05:05 PM
congrats but wtf, same setup as me, yet took me 21 psi to hit 300whp. if you can hit that at 15psi, then im sure i can. ohhhh zacharyyyyy! where izzz youuu
|
108755, RE: First time on the dyno 297 hp / 270 ft lbs
Posted by fresh95, Jun-06-11 05:41 PM
Here's a link to a shitty phone video, but it's all I have.
I have the dyno sheet, but no way to scan it..
... so I'll have to work on that one.
|
108756, RE: First time on the dyno 297 hp / 270 ft lbs
Posted by Slo2g, Jun-06-11 05:52 PM
What do you want from me? Not too shabby of numbers congrats! Mikey, your car had issues, this is what normal cars make on about 15psi(as far as a 2gnt anyway). Get some spark control on that bitch and up the boost!
|
108840, RE: First time on the dyno 297 hp / 270 ft lbs
Posted by xiDsmmanix, Jul-23-11 09:38 PM
Congrats on the car man! I'm hoping to break 300 hp too :P
|