108519, RE: Challenge: plot your setup on the compressor map Posted by 420agreenvilleSC, Dec-31-69 06:00 PM
good thread dave. I didn't see anything wrong with your calculations zac but nevertheless, I suck at math. I don't know what's good or bad nor do I know if I calculated this correctly. As zac did, I used Dave's VE and IM temp #'s. I wanna do more reading on this... interesting.
T04E Specs: 3" INLET DIAMETER 2" OUTLET JOURNAL BEARINGS .57 COMPRESSOR WHEEL TRIM .50 A/R COMPRESSOR .63 A/R TURBINE
Pressure Ratio: (16+14.7) / 13.7 = 2.241
Airflow: 350 x 12 x (.55 / 60) = 38.5 lbs/min
Calculated Mani Pressure: (38.5 x 639.6 x 590) / (.98 x 3500 x 122.04) 14528514 / 418597.2 = 34.71 34.71 - 14.7 = 20.01 psig boost @7000 RPM
Compressor Discharge Pressure: 34.71 + 2 = 36.71 psia
Compressor Inlet Pressure: 14.7 - 1 = 13.7 psia
Pressure Ratio: 36.71 / 13.7 = 2.68
Airflow Actual (34.71 x .98 x 1750 x 122.04) / (639.6 x 590) 7264754.406 / 377364 = 19.25 lbs/min @3500 RPM
|