Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectHRC instructions Oil Pan
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=107891
107891, HRC instructions Oil Pan
Posted by zwickyj, May-20-10 01:53 PM
Does anyone happen to have the HRC instructions for tapping the oil pan. I was reading GSGoinFast's write up and the link is dead. I know it needs to be above oil level, but I just want to get it right the first time.

107894, RE: HRC instructions Oil Pan
Posted by 420agreenvilleSC, May-20-10 02:06 PM
just put it below the turbo, top/front of the oil pan, in between bolt holes for the oil pan. you'll be fine.
107896, RE: HRC instructions Oil Pan
Posted by zwickyj, May-20-10 04:20 PM
Ok, Thanks
107908, RE: HRC instructions Oil Pan
Posted by Corbin, May-22-10 02:52 PM
The instructions say:

View oil pan from front.
Locate third mounting hole from right.
Measure 1" to the left of the center of this mounting hole.
Measure 1" down from the top of the mounting flange.
Drill a 3/4" hole where your measurements cross.


Corbin
'95 ESI-T

Now with more power and fewer leaks



Humble servant of the Wiki