will the bosch #0 280 150 785 work in our cars i am planning to run 8psi on a t04e they are 308cc with a 14.2ohm resistance. I will be running the 255lph pump and an adjustable 12:1 fmu. just looking for a little advice

Thank you all in advance

If the physical dimensions are the same you can use them with the stock fuel rail. Otherwise you will need to adjust your fuel rail and intake manifold accordingly. Additionally if you have a method of tuning/fuel control your life will be easier.

I know that they use the 14mm o-ring seals on both sides and they look the same as ours. I was thinking about the safc to adjust at idle.